Step 3: Cutting

Send the cut data to the machine, and cut the material.

IMPORTANT If the material comes off or the machine operates abnormally, press [PAUSE] to cancel the output.

Lower the loading lever, take out the material, and perform the setup again from the beginning.

WARNING

Never touch the cutting carriage while output is in progress.

The cutting carriage moves at high speed. Coming into contact with the moving carriage may cause injury.

Procedure
  1. Click Icon_CutStudio_Cut.

    The Cut window is displayed.

    CutStudio_Cutting
  2. Click OK.

    Cutting starts.

    CutStudio_Cut_OK