Step 1: Prepare the Data for Recutting

Clear all data remaining in the machine's memory, and then send new data so that only the required data is stored in the machine's memory.

Procedure
  1. Check that the material has been loaded.
  2. Press [MENU] several times to display the following screen.
    MENU_UNSETUP
  3. Press [▼] several times to display the following screen.
    MENU_REPLOT_DATA-EXISTS

    If "NO DATA" is displayed, proceed to Step 6.

  4. Press [▶].
    MENU_REPLOT_START
  5. Press [▼] to select "CLEAR".
    MENU_REPLOT_CLEAR
  6. Press [ENTER].
    The data is cleared.
    MENU_REPLOT_NO-DATA
  7. Send data from the computer.