Step 2: Setting the Cutting Conditions

Procedure
  1. Check that the material has been properly loaded and set up.
    Setting Up Material
  2. In the Roland CutStudio panel, select GS2-24 under MODEL.
    Illustrator_Mac_RolandCutStudio_Model
  3. In the panel, click Update Information.

    The cuttable range is acquired from the connected machine, and the display onMedia will be updated.

    Illustrator_Mac_RolandCutStudio_Reflesh
    MEMO

    If The machine is not responding. is displayed, check the settings on this machine and the computer.

    The Machine Doesn't Run
  4. Click Icon_Illustrator_RolandCutStudio_Menu on the palette, and then click Preferences.
    Illustrator_Mac_RolandCutStudio_Preference
  5. Select the Use Cut Setting check box.
    Illustrator_Mac_RolandCutStudio_CutSetting_02
  6. Click OK.
  7. Click Icon_Illustrator_RolandCutStudio_Menu on the palette, and then click Cut Setting.
    Cut Setting appears by selecting Cut Setting.
    Illustrator_Mac_RolandCutStudio_CutSetting_01
  8. Set the cutting conditions.

    Normally, the Use Machine Setting check box is selected.

    To change the cutting condition, unselect the Use Machine Setting check box, and enter values.

    Illustrator_Mac_RolandCutStudio_UseMachineSetting
  9. Click OK.

    The cutting range and conditions are saved.