2. Perform cutting

MEMO

If the material comes loose or the machine operates unusually, press PAUSE/RESUME to cancel output. Then reload the material, starting over from the beginning.

Procedure
  1. If CutStudio is not running, start it.

    Open the file if it is not currently opened.

  2. Click CS_042_JP.

    The Cut window appears.

  3. Click Change.

    The Cutting Setup window appears.

  4. Click Change.

    The printer driver properties window appears.

  5. Click the Cutter tab.
  6. Edit the cutting conditions ().

    Set other items () as necessary.

    Click Load to load cutting condition presets.

    Set_cut-param
  7. Click OK in the printer driver properties window.
  8. In the Cutting Setup window, click OK.
  9. In the Cut window, click OK.

    The data is output and cutting starts.