Setting the Blade Offset

Set the blade offset. Enter the listed offset value for the blade. When using the included blade, cutting can be performed using the factory-default settings.
MEMO If the beginning of a cut deviates from the intended location or if the corners of a shape are not clean, adjust the offset value.
Procedure
  1. Press [OFFSET].
    If material is loaded, press [ON/OFF LINE] to switch to offline mode.

    The current offset value is displayed.


    MENU_OFFSET

  2. Press [▲] or [▼] to change the offset value.
  3. Press [ENTER] to confirm your entry.
    MEMO
    • Default setting: 0.250 mm (0.010 in.)
    • Setting range: 0.000 to 1.000 mm (0.000 to 0.040 in.)