Conditions for Usable Materials

The conditions for materials that can be loaded in the machine are shown below.

		GR2-640 (64 in.)	GR2-540 (54 in.)
Size	Width	50 to 1,782 mm (1.97 to 70.1 in.)	50 to 1,594 mm (1.97 to 62.7 in.)
	Length^*1	120 mm (4.73 in.) or more (flat material)
	Cuttable material thickness^*2	0.8 mm (31.4 mil.) or less (Depending on material type)
	Max. outer diameter of roll material	160 mm (6.3 in.)^*3 (210 mm [8.2 in.] when roll holder flanges are not used)
	Inner diameter of roll material core^*3	76.2 mm (3 in.)
Weight	Max. weight of roll material	24 kg (52.9 lb.)	20 kg (44.1 lb.)

^*1 There is no limit for roll materials

^*2 Includes the thickness of carrier paper

^*3 When roll holder flanges are used

Other Conditions

Materials with any of the following characteristics cannot be used:

MEMO For printing and cutting, use white material with carrier paper that can be printed on using a laser or inkjet printer.

Feedback