Safety Precautions
Do not remove covers or parts from this machine.
Doing so may result in electrical shock.
Never climb on the table.
Doing so may result in injury. It may also decrease the table accuracy.
Clean the machine regularly.
Debris or dust collecting on the parts in use may cause current leakage or deterioration of the insulation, resulting in fire and smoke hazards.
Do not place vases, flowerpots, cups, cosmetics, chemicals, containers of water, or small metal objects on or near this machine.
Water and metal objects entering the machine may result in fire and electrical shock.
Do not touch the UV-LED device.
The UV-LED device becomes very hot during operation. Touching it may cause injury or burns.
Perform cleaning of the UV-LED device only after it has cooled completely.
Failure to wait until the LED UV device cools completely may cause burns.
Do not disassemble or modify the machine.
Doing so may result in fire or electrical shock.
This printer uses ultraviolet curable inks (UV inks).
Be sure to wear protective gloves and UV protective eyewear during maintenance.
When cleaning the inside of the machine, be sure to contact your authorized dealer.
If the machine is not cleaned for a long time with dust accumulated inside of it, it may result in fire or malfunction.
Keep the print heads, their surrounding areas, and the nozzle surfaces away from water and alcohol.
Inks may coagulate when mixed with water or alcohol.
Do not use chemicals containing benzine, paint thinner, or abrasives.
Doing so may degrade or deform the cover surfaces.
Do not lubricate the inside of the machine.
Doing so may cause the machine to malfunction.
Be sure to inspect the machine and replace specified parts periodically.
The machine contains components that may be damaged when touched.
Do not touch components such as connectors, sensors, and LEDs. Doing so may cause malfunctions.