Disclaimers and Standard Information

Thank you very much for purchasing this product.

  • To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this guide completely.
  • Unauthorized copying or transferal, in whole or in part, of this guide is prohibited.
  • The specifications of this product and the contents of this guide are subject to change without notice.
  • The guide and the product have been prepared and tested as much as possible. If you find any misprints or errors, please inform us.
  • Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product, regardless of any failure to perform on the part of this product.
  • Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made using this product.

Duplication and Printing Prohibited

Do not copy or print any item for which reproduction is prohibited by law.

Copying or printing the following items is generally prohibited by local law:

bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.

The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.

Notes on Disposing

When disposing of waste ink and containers, gloves, etc. to which ink has adhered, follow the rules determined by the country or local government. The material might become subject to incineration as industrial waste or the combustion-mixed program. This classification might differ depending on the judgment of waste management suppliers. If possible, recycle the material. When disposing of machines, contact your service representative. Perform waste disposal properly based on the laws of the local government in each region.

Declaration of Conformity

  1. Model Name:

    EU2-1000MF

  2. Name and address of the manufacturer

    Name: Roland DG corporation

    Address: 1-1-2 Shinmiyakoda, Hamana-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

  3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
  4. Object of the declaration:

    Product Name: Inkjet Printer

  5. The object of the declaration described above is in conformity with following provisions.

    Machinery Directive

    EMC Directive

    RoHS Directive

  6. References to the relevant harmonized standards used or other technical specifications.

    EN ISO 12100

    EN 60204-1

    EN 1010-1

    EN 1010-2

    EN 61000-6-2

    EN 61000-6-4

    EN IEC 63000

  7. Authorized Compiler of technical files in the Community:

    Roland DG EMEA N.V.

    Bell Telephonelaan 2G, 2440 Geel, Belgium

  8. Additional information:

    None

    Signed for and on behalf of: Roland DG corporation

    Importer:

    Roland DG EMEA N.V.

    Bell Telephonelaan 2G, 2440 Geel, Belgium

NOTICE

Grounding Instruction
  • In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
  • Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
  • Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.
  • Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
  • Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool's plug.
  • Repair or replace damaged or worn cord immediately.

For EU Countries


CEmark

Manufacturer:

ROLAND DG CORPORATION

1-1-2 Shinmiyakoda, Hamana-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

The importer in the EU:

Roland DG EMEA N.V.

Bell Telephonelaan 2G, 2440 Geel, Belgium

For UK


UKCAmark

Manufacturer:

ROLAND DG CORPORATION

1-1-2 Shinmiyakoda, Hamana-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

The importer in the UK:

Roland DG (U.K.) Ltd.

Dominions House Lime Kiln Close, Stoke Gifford, Bristol, England, BS34 8SR, United Kingdom

For EU Countries

WARNING

Operation of this equipment in a residential environment could cause radio interference.

For EU Countries


WEEE

All Other Users

If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/service representatives.

For the USA

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT

Responsible Party: Roland DGA Corporation

Address: 15363 Barranca Parkway Irvine, CA 92618, U.S.A.

Telephone: 949-727-2100

Type of Equipment: Printer

Model Name: EU2-1000MF

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Use only I/O cables that have been designed and manufactured specifically for this device.

For Canada

CAN ICES-3 (A)/NMB-3(A)

For California

WARNING

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.