Specifications

Printing method		Piezo ink-jet method
Media	Width	259 to 1,625 mm (10.2 to 64 in.)
	Thickness	Max. 1.0 mm (39.3 mil) with liner
	Roll outer diameter	Max. 250 mm (9.8 in.)
	Roll weight	Max. 45 kg (99 lb.)
	Core diameter	76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing width^*1		Max. 1,615 mm (63.5 in.)
Ink	Type	Eco-Solvent Ink (D-EA) 500 ml cartridge
Ink	Colors	Four colors (Cyan, Magenta, Yellow, and Black)
Printing resolution (dots per inch)		Max. 1,200 dpi
Media heating system^*2		Print heater set temperature: 30 to 45°C (86 to 113°F) Dryer set temperature: 30 to 55°C (86 to 131°F)
Connectivity		Ethernet (100BASE-TX/1000BASE-T, automatic switching)
Power-saving function		Automatic sleep feature
Power requirements		100-120 / 220-240 Va.c. 50 / 60 Hz 8.9 / 4.5 A
Power consumption	During operation	Approx. 1,180 W
Power consumption	Sleep mode	Approx. 50 W
Acoustic noise level	During operation	66 dB (A) or less
Acoustic noise level	During standby	53 dB (A) or less
Dimensions (width × depth × height)		2,886 mm × 748 mm × 1,415 mm (113.7 in. × 29.5 in. × 55.8 in.)
Weight		188 kg (415 lb.)
Environment	During operation^*3	Temperature: 20 to 32°C (68 to 89.6°F), humidity: 35 to 80%RH (no condensation)
Environment	Not operating	Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation)
Included items		Dedicated stand, power cord, media take-up unit, media holders, replacement blade for separating knife, cleaning liquid bottle for maintenance, drain bottle, User's Manual, software (VersaWorks, Roland DG Connect), etc.

^*1 The length of printing is subject to the limitations of the application software.

^*2

Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
Depending on the ambient temperature and the media width, the preset temperature may fail to be reached.

^*3 Operating environment (Use in an operating environment within this range.)