Adım 2: Perform normal cleaning.

Prosedür
  1. Girilen değeri onaylamak için[▼]tuşuna basın.


  2. Check for the group with dot drop-out or dot displacement by viewing the results of the printing test.
    The space from [A] to [B] is group A. The space from [B] to the right side is group B.

    AP_TESTPRINT_NORMAL
    ÖNEMLİ If the printing-test results are difficult to interpret

    Check the results in a bright location, changing your line of vision. They are visible using the reflection of the light.

  3. Press [▶].
  4. Select the group of print heads to clean.
    1. Press [◀] or [▶] to select the group of print heads that is not to be cleaned.

      MENU_FUNC_CLEANING_NORMAL_2HEAD_AB

    2. Press [▲] or [▼] to get rid of the group display.

      MENU_FUNC_CLEANING_NORMAL_2HEAD_A

    3. Repeat steps 1 and 2 to display only the group of print heads that requires cleaning.
      Only the displayed groups will be cleaned. If "AB" is displayed, both groups will be cleaned.
  5. Girilen değeri onaylamak için[ENTER].
    Aşağıda gösterilen ekran görünür ve ardından temizlik başlar. Prosedürün kalan (tahmini) süresi ekranda görüntülenir. (Aşağıda gösterilen ekran bir örnektir."01:45"= "1 dakika ve 45 saniye")


    Tamamlandığında, aşağıda gösterilen ekran tekrar görünür.


  6. Girilen değeri onaylamak için[▲].


  7. Girilen değeri onaylamak için[ENTER].
    Perform a printing test again to check whether the dot drop-out and dot displacement have been corrected.
  8. Check to make sure the dot drop-out or dot displacement has been corrected.
    If the problem persists, try performing normal cleaning again. If the printer has been used for a long period, dot drop-outs may not be fixed even after performing normal cleaning two or three times. If this is the case, clean using a different method. For details on other cleaning methods, see the "User's Manual, Maintenance Edition."