Шаг 2: Perform normal cleaning.

Процедура
  1. Нажмите[▼]чтобы отобразить следующий экран.


  2. Check for the group with dot drop-out or dot displacement by viewing the results of the printing test.
    The space from [A] to [B] is group A. The space from [B] to the right side is group B.

    AP_TESTPRINT_NORMAL
    ВАЖНО! If the printing-test results are difficult to interpret

    Check the results in a bright location, changing your line of vision. They are visible using the reflection of the light.

  3. Press [▶].
  4. Select the group of print heads to clean.
    1. Press [◀] or [▶] to select the group of print heads that is not to be cleaned.

      MENU_FUNC_CLEANING_NORMAL_2HEAD_AB

    2. Press [▲] or [▼] to get rid of the group display.

      MENU_FUNC_CLEANING_NORMAL_2HEAD_A

    3. Repeat steps 1 and 2 to display only the group of print heads that requires cleaning.
      Only the displayed groups will be cleaned. If "AB" is displayed, both groups will be cleaned.
  5. Нажмите[ENTER].
    Появится экран, показанный ниже, после чего начнется очистка. На экране отображается (приблизительное) оставшееся время выполнения процедур. (Приведенный ниже экран является примером."01:45"= «1 минута и 45 секунд»)


    После завершения снова появится экран, показанный ниже.


  6. Нажмите[▲].


  7. Нажмите[ENTER].
    Perform a printing test again to check whether the dot drop-out and dot displacement have been corrected.
  8. Check to make sure the dot drop-out or dot displacement has been corrected.
    If the problem persists, try performing normal cleaning again. If the printer has been used for a long period, dot drop-outs may not be fixed even after performing normal cleaning two or three times. If this is the case, clean using a different method. For details on other cleaning methods, see the "User's Manual, Maintenance Edition."