Configuring the Network Settings on the Machine

IMPORTANT

In an environment where the computer being used is connected to multiple network devices and the Internet, inappropriate settings will have a large effect on the entire network. For detailed information about the settings, consult your network administrator.

Procedure
  1. Turn off DHCP.
    Step 1: Turn off DHCP.
  2. Set the IP address.
    Step 2: Set the IP address.
  3. Set the subnet mask.
    Step 3: Set the subnet mask.
  4. If the subnet mask of this machine differs from that of the computer that will output the print data, you will have to set the gateway address.
    Step 4: Set the gateway address.
This completes configuration of the network settings on the machine.
For information on configuring the computer's network settings, refer to the following.