Switching Off the Print Heater and Dryer Together

This setting is useful when you want to switch off the media heating systems collectively. Setting "POWER" to "OFF" in the heater settings will make it impossible to set the temperature of the print heater and dryer.
Procedure
  1. Press [FUNCTION].
  2. Press [▼] several times to display the following screen.
    MENU_FUNC_HEATERCONFIG
  3. Press [▶] to display the following screen.


  4. Press [▶].
  5. Press [▲] or [▼] to select "OFF."


  6. Press [ENTER] to confirm your entry.
    The settings for the print heater and dryer are turned off.
  7. Press [FUNCTION] to go back to the original screen.
    MEMO

    Default setting: "ON"

    IMPORTANT

    When this is set to "OFF", the heater will not turn on even if the heater temperature is set in the software RIP.