Powerful Cleaning Method (ER-641)

The print heads are important components that discharge ink. They require periodic and appropriate maintenance. When problems such as dot drop-out are not resolved by medium cleaning, perform the more forceful "powerful cleaning" to remove clogging from the print heads.
IMPORTANT

Powerful cleaning consumes more ink than medium cleaning, and overly frequent use may damage the print heads themselves. Avoid performing this operation more than necessary.

Procedure
  1. Set up the media.
    For details on setting up the media, see the "User's Manual, Basic Edition."
  2. Press [FUNCTION].
  3. Press [▼], then [▶] to display the screen shown below.


  4. Press [ENTER].
    A test pattern is printed.
  5. Press [▼] several times to display the following screen.
    CLEANING POWERFUL CL._ER-641
  6. Check for dot drop-out and dot displacement by viewing the results of the printing test.

    print head test print
    IMPORTANT If the printing-test results are difficult to interpret

    Check the results in a bright location, changing your line of vision. They are visible using the reflection of the light.

  7. Press [ENTER] to confirm your entry.
    The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the procedure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 seconds")


    When finished, the screen shown below appears again.


  8. Press [▼] several times to display the following screen.


  9. Press [ENTER].
    Perform a printing test again to check whether the dot drop-out and dot displacement have been corrected.
    MEMO

    • If the problem persists, try performing powerful cleaning again.

    • If problems such as dot drop-out and dot displacement persist even after you have performed powerful cleaning several times, perform "manual cleaning."