Supply the compressed air after the air hose is connected securely.
Failure to do so may cause an accident.
Required items
Regulator
Screw (for the regulator)
Air hose
Torque screwdriver
(0.6 N·m)
IMPORTANT
Do not loosen screws with a torque screwdriver with the sleeve () attached.
Doing so may damage the sleeve. Before loosening screws, remove the sleeve from the torque screwdriver.
IMPORTANT
Before tightening a screw that has a specified tightening torque, be sure to attach a sleeve. Check the marking on the sleeve () and use a sleeve that matches the tightening torque value.
Failure to attach a sleeve will cause a torque in excess of the permitted amount to be applied, which may damage parts and materials.
