Checking the Included Items

The following items are included with the machine. Make sure they are all present and accounted for.

powercode_jp

Power cord, power plug adapter (1 each)

USB cable

USB cable (1)

regulator

Regulator, drain hose, hose clamp (1 each)

air_hose

Air hose (1)

DWX-53DC_AdapterForTable

Adapter (6)

AutomaticCorrectionJig

Automatic correction jig (1)

DWX-53DC_PinAdapter_ForTable

Pin-type workpiece adapter (1)

DWX-53DC_Special_Adapter_ForTable

Open edge adapter (1) *1

DWX-53DC_ToolAdapter_ForTable

Milling bur positioner (1)

DWX-53DC_Toolholder_ForTable

Milling bur holder (15)

DWX-53DC_DetectionPIN_ForTable

Detection pin (1)

ToolStocker

Tool rack (1)

Wrench

Collet attaching/detaching jig (1)

Hex_T-Driver

T-shaped hexagonal screwdriver (1)

Hex-L

L-shaped hexagonal wrench (1)

Brush

Brush (1)

Mounting_screw

Mounting screws (25)

Screw

Screws

(adapter spare; 8)

Screw_3

Screws

(pin-type workpiece adapter spare; 2)

Screw_2

Black screws

(for regulator and dust collection hose adapter; 4)

Cloth_for_care

Cloth for care (1)

DWX-53DC_ToolForTable

Milling burs (4)*2

DWX-53DC_TorcDriverForTablel

Torque screwdriver*3

DWX-53DC_DiskForTable

Disc workpieces for manual correction

(Wax material; 2)*4

DWX-53D_hose_adapter_ForTable

Dust collection hose adapter

(1)

DWX-53D_hose_ForTable

Dust collection hose

(long/short; 1 each)

rack

Adapter rack (1)

DWX-53D_core_ForTable

Ferrite core (1)

DWX-53DC_DummyPinCleaner_ForTable

Dummy pin cleaner

(spare for replacement; 1)

Adapter_ID_labels

Adapter ID labels

(optional; 1)*5

GuideManual

Quick Access Guide (1)

ManualForTable

Safety Precautions (1)

*1 Affix an (optional) adapter ID label to the adapter before using this adapter. You can use any adapter ID label number.
*2 ZRB-200D, ZPB-100D, ZPB-50D, and ZPB-30D (1 each)
*3 Handles (2), bits (1.5 mm [0.06 in.], 2.5 mm [0.1 in.], and 3.0 mm [0.12 in.]; 1 each), and sleeves (0.3 N·m, 0.6 N·m; 1 each)
*4 These are exclusively for performing manual correction of the machine. Do not perform milling with these workpieces.
*5 Use these labels when you have purchased optional adapters.
IMPORTANT

When using the torque screwdriver with a sleeve attached, do not loosen screws that have been tightened with a torque greater than or equal to the value on the sleeve. Doing so may damage the sleeve.