Replacing Parts Used in Milling

Contact your authorized DGSHAPE Corporation dealer or visit our website to purchase items.

Part name Replacement time/Guideline
DWX-53DC_Spindle_ForTable
Spindle unit
When the total work time of the spindle exceeds 2,000 hours (with variation depending on the work situation).

You can use VPanel to view the working time of the spindle. For information on how to perform replacement, refer to the replacement instruction manual included with the part.

  • The replacement spindle unit comes with a collet and belt.
Collet
Collet
If the collet is deformed.

If an overload error or other error occurs, the collet may be deformed. For information on how to perform replacement, refer to the replacement instruction manual included with the part.

DWX-53DC_SpindleBelt_ForTable
Spindle belt
If the spindle belt is worn.

For information on how to perform replacement, refer to the replacement instruction manual included with the part.