Danger of components flying off or becoming damaged

WARNING
PL_kinshi

Ensure that the supplied compressed air is not contaminated by water, oil, chemicals, or foreign objects.

The components may deteriorate or rupture, or the contaminants may be scattered, posing a hazard.

PL_kinshi

Never use in a location exposed to cutting oil, solvents, chemicals, or other such substances.

Components may deteriorate or rupture under the pressure of compressed air.

PL_kinshi

Never use in a location exposed to direct sunlight.

Components may deteriorate or rupture under the pressure of compressed air.

PL_Qcircle

Keep the temperature of the installation area within the specified range. Never place a stove or heater nearby.

Components may deteriorate or rupture under the pressure of compressed air.

PL_Qcircle

Connect the air hose securely, so that it will not come loose.

A pressurized hose that comes loose may whip about uncontrolled, posing a hazard. Connect securely.

PL_Qcircle

Before attempting to attach or detach the air hose or optional items or before attempting to perform cleaning or maintenance that does not require the machine to be connected to a power source, stop the supply of compressed air and allow the pressure to escape.

Allowing the equipment to remain under pressure poses a hazard of flying components.

PL_Qcircle

Use an air hose of the specified diameter and having adequate pressure resistance.

Otherwise the article may come loose or rupture.

PL_kinshi

Never strike or subject the object to impact.

Components may suffer damage or rupture under the pressure of compressed air.

PL_Qcircle

When the machine will be out of use for a prolonged period, stop supply of compressed air and bleed off the air pressure.

This can prevent an accident.

PL_kinshi

Never damage the air hose, or bend or twist it with excessive force. Never use an item that has deteriorated.

A damaged air hose may rupture.

PL_Qcircle

Be sure to bleed off the air pressure before removing the regulator bowl.

Failure to do so may result in a rupture or components flying off.

PL_Qcircle

Clean the regulator bowl using a neutral detergent. Never use solvents such as gasoline, alcohol, or thinner.

Using solvents may degrade the bowl and may result in a rupture.

Important notes about the end (cut edge) of the air hose
Failure to observe these cautions may result in air leakage or easy dislodgement of the air hose. Also, when a hose has been detached, cut off the end before reattaching the hose.
PL_hose_tip PL_hose_waste PL_hose_diagonal PL_hose_scratch
Ensure that it is not crushed. Make the cut edge straight. Keep free from damage or soiling.