Performing Disc Changer Run-in

Perform disc changer run-in to stabilize the ascending and descending operations of the disc changer.

  1. Close all the covers.
  2. Turn on the power to the machine.
  3. Show VPanel.
  4. Click Icon_VPanel_MachineSetting.

    The Machine settings - DWX-53DC window will appear.

  5. On the Maintenance tab, click Disc changer run-in.
  6. When the window shown in the following figure appears, click OK.

    Run-in will begin.


    When a message indicating that work is complete appears, the disc changer run-in is complete.