Specifications
| DWX-53DC | ||
|---|---|---|
| Millable material*1 |
Zirconia Wax PMMA Gypsum PEEK PEKK Glass fiber reinforced resin Composite resin CoCr Sintered metal Polycarbonate |
|
| Loadable workpiece shape |
Disc-type (with step) |
Step section: 98.5 mm (3.88 in.) (diameter), 10±0.3 mm (0.39±0.0118 in.) (height) Body section: 95 mm (3.74 in.) (diameter), 35 mm (1.38 in.) max. (height) |
| Pin-type | Pin diameter: 6 mm (0.24 in.) | |
| Loadable workpiece weight | 850 g or less | |
| Number of loadable adapters | 6 | |
| Operating speed | XY：~3,000 mm/min (~118 in./min)、Z：~2,700 mm/min (~106 in./min) | |
| Spindle motor | Brushless DC motor | |
| Spindle rotating speed | 6,000 to 30,000 rpm | |
| Rotary axis travel angle | A: ± 360°, B: ± 35° | |
| Number of milling burs housed | 15 | |
| Attachable milling bur | Shank diameter: 4 mm (0.16 in.), length: 40 to 55 mm (1.57 to 2.17 in.) | |
| Compatible compressed air | 0.4 MPa | |
| Interface | USB | |
| Control command sets | RML-1, NC code | |
| Power requirements | 100-240 VAC ± 10%、50/60 Hz (overvoltage category II, IEC 60664-1), 2.8 A | |
| Power consumption | Approx. 250 W | |
| Operating noise |
During operation: 70 dB (A) or less (when not cutting) During standby: 45 dB (A) or less |
|
| External dimensions | Width × depth × height: 650 × 763 × 831 mm (25.6 × 30.1 × 33.0 in.) | |
| Weight | 120 kg (265 lb.) | |
| Installation environment |
Indoor use at altitudes up to 2,000 m Temperature: 5 to 40°C (41 to 104°F), humidity: 35 to 80%RH (no condensation) Ambient pollution degree: 2 (as specified by IEC 60664-1) Short-term temporary overvoltage: 1,440 V, long-term temporary overvoltage: 490 V |
|
| Included items | Power cord, USB cable, safety information, quick access guide, detection pin, automatic correction jig, torque screwdriver, T-shaped hexagonal screwdriver, L-shaped hexagonal wrench, collet attach-detachment jig, milling bur holders, milling bur positioner, regulator, barcode label, adapter, open edge adapter, adapter rack, pin-type workpiece adapter, milling bur, tablet holder, dust-proof cover, etc. | |
*1 Even when made from the described materials, some workpieces cannot be milled due to specifications or physical properties. For more information, contact your authorized Roland DG Corporation dealer.