Specifications
| DWX-43W | ||
|---|---|---|
| Millable material*1 |
Glass ceramics Titanium alloy Composite resin PMMA, PEEK Glass fiber reinforced resins Sintered zirconia |
|
| Loadable workpiece shape | Pin-type workpiece | Width × depth × height: max. 40 × 20 × 20 mm (1.5 × 0.8 × 0.8 in.) |
| Number of loadable workpieces | 6 | |
| Operating speed | XYZ: 6 to 1800 mm/min (0.24 to 70.9 in./min.) | |
| Spindle rotating speed | 15,000 to 60,000 rpm | |
| Rotary axis travel angle | A: ± 360° | |
| Number of milling burs housed | 6 | |
| Attachable milling bur | Shank diameter: Φ3 mm (0.12 in.), Dedicated milling bur | |
| Compatible compressed air | 0.18 to 0.22 MPa | |
| Interface |
USB Ethernet (10 BASE-T/100 BASE-TX automatic switching) |
|
| Control command sets | RML-1, NC code | |
| Power requirements | 100 VAC ± 10%, 50/60 Hz (overvoltage category: II, IEC 60664-1), 2.1 A | |
| Power consumption | Approx. 190 W | |
| Operating noise |
During operation: 70 dB (A) or less (when not cutting) During standby: 48 dB (A) or less |
|
| External Dimensions | Width × depth × height: 482 × 560 × 600 mm (18.98 × 22.05 × 23.63 in.) | |
| Weight | 61 kg (135 lb.) | |
| Installation environment |
Indoor use at altitudes up to 2,000 m Temperature: 5 to 28°C (41 to 82°F), humidity: 35 to 80 % (no condensation) Ambient pollution degree: 2 (as specified by IEC 60664-1) Short-term temporary overvoltage: 1,440 V, long-term temporary overvoltage: 490 V |
|
| Included items |
Power cord, power plug adapter, USB cable, detection pin, correction jig, T-shaped hexagonal screwdriver, regulator, Safety Precautions, Quick Access Guide, etc. |
|
*1 Even when made from the described materials, some workpieces cannot be milled due to specifications or physical properties. For more information, contact your authorized Roland DG Corporation dealer.