Cleaning and Maintaining the Flushing Sponges

When a message appears on the operation panel, clean around the flushing sponges and replenish the cleaning liquid in the color-section sponge.
IMPORTANT
  • Be sure to use different cleaning sticks in the color ink side and the structural ink side. Using the same cleaning stick may lead to the structural ink and color ink mixing, resulting in ink hardening and discharge issues.
  • Never use any implements other than the included cleaning sticks. Cotton swabs or other lint-producing items may damage the print heads.
  • Do not use a dropper or cleaning liquid other than those included.
  • Be sure to use new cleaning sticks. Reusing cleaning sticks will adversely affect the printing results.
  • Do not put a cleaning stick that has been used for cleaning into the cleaning liquid. Doing so will deteriorate the cleaning liquid.
Required item


dropper
Tweezers
DA-640_cleaning-liquid
Cleaning stick (2) Dropper Tweezers Cleaning liquid bottle for maintenance
Procedure
  1. Tap Panel_Icon_Menu on the operation panel.
  2. Tap Cleaning - Flushing sponge.
  3. Tap Execute next to Cleaning Liquid Replenishment.
  4. Follow the instructions on the operation panel to perform the work.

    After finishing the instructed work, tap Panel_Icon_Right_Blue to display the next step. In this manner, perform each step of the work in order. If you want to check the previous step or perform it again, tap Panel_Icon_Left_Blue.

    When you finish the last step, tap Finish All.

  5. Tap Panel_Icon_Home.
    The home screen appears.