Perform a printing test.

Procedure
  1. Set up the media.

    Setup of New Media

    Setup of Registered Media

  2. Tap Panel_Icon_TestPrint Nozzle Drop-out Test on the home screen.
  3. Tap Execute next to Printing Test.
    Printing of the test pattern starts.
  4. Check whether there is dot drop-out or dot displacement in the test pattern.
    You can check the discharge status of the CMYK ink with Print light and the discharge status of the structural ink with Black Light. Check these statuses while switching the light as necessary. Use the operation panel's home screen to switch the light.

    Panel_swith_light

    Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.


  5. Close the front cover.
    If no dot drop-out or dot displacement occurs, this operation is finished.
  6. Tap Panel_Icon_Home.
    The home screen appears.