Network Settings


Connect_ethernet_HUB

The IP address of this machine can be assigned automatically from a DHCP server. If there is a DHCP server on your local network, no network settings are required. After connecting a LAN cable, carry out 4. Downloading and Installing Software on the computer you are using.
However, if there is no DHCP server, if no DHCP server can be found, or if there is a problem on the DHCP server, the IP address will not be automatically assigned. If the message Connection is requiring too much time. Manually setting the IP address will improve the connection speed. appears when you tap Panel_Icon_Notification, carry out the procedure in the following section to set the network. Also use the method in the following section to fix the IP address for the destination to output data to from the computer.