Returning Adjustments to Their State Prior to the Initial Settings

Use the following procedure to return the correction and adjustment values listed below to their values before the initial settings were performed.
IMPORTANT

Initialize the Adjustment Value Set at the First Startup is only enabled when the sub power is off.

  • Feed Correction
  • Media Gap Adjustment
  • Multi Sensor Adjustment
  • Blade Adjustment
  • Print & Cut Position Adjustment
Procedure
  1. Switch off the sub power.
  2. Click AP-640_Panel_Icon_MENU.
  3. Click Execute under Preferences - Initialize Settings - Initialize the Adjustment Value Set at the First Startup.
  4. In the confirmation window, click OK.
  5. Click Close to return to the original screen.