Printing Area
Maximum Area
The printing or cutting area along the horizontal plane of the loaded media (the direction in which the print-head carriage moves) is determined by the positions of the pinch rollers.
| Printing or cutting area | |
| Left pinch roller | |
| Right pinch roller | |
| Printing or cutting coordinates origin (0,0) | |
| A | Max. 480 mm (18.89 in.) |
| B | Max. 24,998 mm (984.2 in.) |
| C | 5 mm (0.2 in.) |
| D | 1.5 mm (0.06 in.) |
| E | 75 mm (3 in.) |
| F | 70 mm (2.76 in.) |
Maximum Area When Using Crop Marks
| Printing or cutting area | |
| Maximum area | |
| Crop mark | |
| A | 12.5 mm (0.5 in.) |
| B | 10 mm (0.4 in.) |
Media Separation Location during Continuous Printing
When a command for separating the media is sent from the computer, the separation location on the media is as shown in the figure below.
| First page | |
| Second page | |
| Separation location | |
| Margin (software RIP value) | |
| A | 75 mm (3 in.) |