Turning the Power On

WARNING

Remove any loaded media or switch off the sub power when printing is not being performed.

The continued application of heat at a single location may cause the release of toxic gases from the media or pose a fire hazard.

Turning the Power On with the Button on the Machine

Procedure
  1. Close the front cover.
  2. Turn on the main power switch.
    BN2_MainPower2
  3. Press the sub power button.

    The sub power is switched on. When the sub power button indicator changes from flashing to steady, startup is finished.

    MEMO

    After switching on the main power, wait some time before pressing the sub power button.

    Firmware initialization starts when the main power is turned on, and there will be no response when pressing the sub power button until initialization is complete.

    TurnON

Turning the Machine On from the Utility Window

Procedure
  1. Close the front cover.
  2. Turn on the main power switch.
    BN2_MainPower2
  3. Start Utility.
    MEMO

    After switching on the main power, wait some time before starting Utility.

    Utility cannot start until the connection between the machine and the computer finishes.

    StartUtility
  4. Click Utility_SubPowerON.

    The sub power is switched on. When the sub power of the machine switches on, the Utility_SubPowerON button in the Utility window changes to Utility_SubPowerOFF.

    INK_Charge4