Emplacement and Installation
Install the machine in a level, stable location offering good operating conditions. An unsuitable location can cause accidents, fire, faulty operation, or breakdown.
Install in a level and stable location.
Failure to do so may result in falling of the machine, leading to injury.
- Locations subject to large fluctuations in temperature or humidity
- Locations subject to shaking or vibration
- Locations where the floor is tilted, not level, or unstable
- Dusty locations
- Locations exposed to direct sunlight
- Locations near air-conditioning or heating equipment
- Locations exposed to water or moving air
- Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy
Unloading and emplacement are operations that must be performed by 2人 or more.
Tasks that require undue effort when performed by a small number of persons may result in physical injury. Also, if dropped, such items may cause injury.
Install the machine in a location that is level, stable, and able to bear the weight of the machine.
The total weight of the machine may reach 60 kg or more. Installation in an unsuitable location may cause a major accident, including tip over, fall, or collapse.
Never install this machine outside or in any location where exposure to water or high humidity may occur.
Current leakage may cause electrical shock or fire.
Never install the machine close to any flammable object or in a gas-filled location.
Combustion or explosion could occur.
Position the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency. Install the machine next to an electrical outlet. Also, provide enough empty space to allow immediate access to the electrical outlet.
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion due to ink fumes.
When lifting the machine, hold the locations shown in the figure.
Holding the circled locations, lift the machine and remove it from the box.
Holding the circled locations, place the machine on the table.
- Do not hold the cover on the front of the machine. Doing so may result in faulty operation or breakdown.
- There is a difference in level on the bottom of the machine. Hold the machine by covering this difference in level on the bottom with your finger.