Start-up cleaning

If dot drop-out and dot displacement persist even after performing Powerful Cleaning, perform the Start-up cleaning.

WARNING

Be sure to perform operations as specified by the instructions, and never touch any area not specified in the instructions.

Sudden movement of the machine may cause injury.

IMPORTANT Important notes on this procedure
  • Before attempting this operation, remove any media.
  • To prevent the print heads from drying out, finish this procedure in 10 minutes or less.
  • Never use any implements other than the included cleaning sheet.
  • Do not use cleaning liquid other than the included cleaning liquid.
  • Be sure to use a new cleaning sheet. Reusing a cleaning sheet will adversely affect the printing results.
If a warning beep sounds during operation
  • A warning beep sounds 10 minutes after operation starts. Perform the operation by following the message displayed in the Utility window.
MEMO
  • When the cleaning sheet and cleaning liquid used for start-up cleaning run out, purchase them from your authorized dealer.

  • The print heads are components that wear out. Periodic replacement is required, with the frequency of replacement depending on use. Contact your authorized dealer.

  • Use the following link to view a reference video for this procedure. We recommend that you view this video to understand the overall flow of work.

    https://vimeo.com/1084879988/ef435ce499

Required items
BY_HeadNozzleRefresher
LEF2-200_cleaningpaper

Dropper


TY_CleaningLiquid

Head nozzle refresher Cleaning sheets Dropper S-PG2-CL cleaning liquid
Procedure
  1. Remove any media.
  2. Click Execute for start-up cleaning.
    MEMO The procedure for performing start-up cleaning appears in the Utility window. Carefully read the on-screen instructions and carry out the work.
  3. When Start-up cleaning is complete, click Finish All.

    The nozzle drop-out test window appears.

    Perform a nozzle drop-out test.

    Step 3: Nozzle Drop-out Test