Messages
These are the main messages that appear in the Utility window to prompt correct operation. These messages are not errors, so you can close them and perform other work.
To check messages again or to carry out their corresponding actions, click 
on the home screen to display the list of messages. Click a message to display the menus and procedure required for the action. Perform operations according to the on-screen instructions.
When output, cleaning, and other operations are completed, discard the discharged fluid.
This message appears when a certain amount of discharged fluid collects in the drain pack.
The time for manual cleaning has arrived.
This message appears when it is time to perform manual cleaning.
Click and perform manual cleaning.
The time for wiper replacement has arrived.
This message appears when it is time to replace the wiper.
Click and replace the wiper.
The time for felt wiper replacement has arrived.
This message appears when it is time to replace the felt wiper.
Click and replace the felt wiper.
The time for wiper pad replacement has arrived.
This message appears when it is time to replace the wiper pad.
Click The time for wiper pad replacement has arrived. and replace the wiper pad.
The time for cap top replacement has arrived.
This message appears when it is time to replace the cap top.
Click The time for cap top replacement has arrived. and replace the cap top.
This message appears when it is time to mix the ink.
Click to mix the ink.
Print head protection mode has activated.
This message appears when the ink in use may not be a product specified by Roland DG Corporation.
If the ink is not a product specified by Roland DG Corporation, a larger amount of ink will be consumed, and drying will be performed frequently. To obtain optimal performance, we recommend that you use ink specified by Roland DG Corporation. To purchase ink, contact your authorized dealer.