Medium Cleaning

When problems such as dot drop-out and dot displacement are not resolved by normal cleaning, perform the more forceful Medium Cleaning to remove clogging from the print heads.
MEMO Medium cleaning consumes more ink than normal cleaning. Because the print heads are prone to damage if cleaned too frequently, do not perform cleaning more than necessary.
MEMO If the media has already been set up, the After cleaning, perform a printing test menu appears. When this is turned on, a printing test is performed after cleaning.
Procedure
  1. Set up the media.
  2. Click BN2_Utility_Icon_NozzleCleaning Cleaning.
  3. Select Medium Cleaning under Head Cleaning, and then click Execute.

    Medium cleaning starts.

    BN-20A_UtilityNozzle_01
  4. When cleaning finishes, click Output.

    Printing of the test pattern starts.

    BN-20A_UtilityNozzle_01
  5. Check whether there is dot drop-out or dot displacement in the test pattern.

    Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.


    TestPrint_Nozzle
    MEMO
    • If the problem persists, try performing medium cleaning again.
    • If problems such as dot drop-out and dot displacement persist even after you have performed medium cleaning two or three times, perform the more forceful Powerful Cleaning.
    • This cleaning can be effective when carried out periodically, according to the frequency of use.
  6. If you have opened the front cover, close it.
    If no dot drop-out or dot displacement occurs, preparations for output are finished.
  7. Click Close to return to the original screen.