Step 3: Nozzle Drop-out Test
Check the print head ink discharge conditions.
MEMO
Use the following link to view a reference video for this procedure. We recommend that you view this video to understand the overall flow of work.
https://vimeo.com/1003475749/6df9f81a6cProcedure
-
Click Output.
Printing of the test pattern starts.
-
Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.- If there is no dot drop-out or dot displacement, click OK.
- If dot drop-out or dot displacement is present, perform cleaning.