Manual Cleaning

If dot drop-out and dot displacement persist even after performing Powerful Cleaning, perform the Manual Cleaning.

MEMO

Use the following link to view a reference video for this procedure. We recommend that you view this video to understand the overall flow of work.

https://youtu.be/gB-WQnIP6NM
gB-WQnIP6NM
Procedure
  1. Remove any media.
  2. Click Execute next to Manual cleaning.

    The print-head carriage moves to the left edge.

    BN2_StartManualCL
  3. Open the left cover.
  4. Follow the instructions in the Utility window to perform Manual Cleaning.
    IMPORTANT

    Important notes on cleaning

    • Use one cleaning stick per cleaning session, and then discard the stick after use. Reusing cleaning sticks may reduce print quality.

    • Never use any implements other than the included cleaning sticks.
    • Do not put a cleaning stick that has been used for cleaning into the cleaning liquid. Doing so will deteriorate the cleaning liquid.
    • Never rub the nozzle surface of the heads.
  5. When Manual Cleaning is complete, click Finish All.

    The nozzle drop-out test window appears.

    Perform a nozzle drop-out test.

    Step 3: Nozzle Drop-out Test