Printing and Cutting Adjustment

When performing both printing and cutting, adjust and align the printing and cutting positions. Depending on the media thickness, sometimes printing and cutting positions are very slightly out of alignment. We recommend that you make corrections to match the media you are using.

MEMO When making these adjustments, use adhesive media that can be cut.
Procedure
  1. Load the media to be cut.
    Loading Media
  2. Open the Utility window.
    Opening the Utility Window/Exiting Utility
  3. Click Print and Cut Adjustment.
    BN-20A_UtilityPreCut
  4. Click Print and Cut Pattern.
    A test pattern is printed.
    BN-20A_UtilityPreCut_01
  5. Follow the on-screen instructions and enter the corrected values for New Scanning Value and New Feeding Value.
  6. Click Apply.
    The values in New Scanning Value and New Feeding Value change to "0."
  7. Click Close.