Usable Media

This machine cannot print on every kind of media. Before selecting media, be sure to perform trial printing to check whether satisfactory output quality is obtained.

Size

Usable Media
Width *1
  • 150 to 170 mm (5.9 to 6.7 in.)
  • 200 to 235 mm (7.9 to 9.3 in.)
  • 287 to 322 mm (11.3 to 12.7 in.)
  • 348 to 383 mm (13.7 to 15.1 in.)
  • 393 to 429 mm (15.5 to 16.9 in.)
  • 439 to 474 mm (17.3 to 18.7 in.)
  • 487 to 515 mm (19.2 to 20.3 in.)
Cuttable media thickness*1 Max. 0.22 mm (8.66 mil; depending on the media composition)
Maximum media thickness (including backing paper)*1

When only printing: 1.0 mm (39.4 mil)

When performing cutting: 0.4 mm (15 mil)
Maximum roll outer diameter 150 mm (5.9 in.)
Paper tube (core) inner diameter 76.2 mm (3 in.) or 50.8 mm (2 in.)
*1 Applies to both roll and sheet media

Maximum Roll Weight

6 kg (13.23 lb.)

Other Conditions

Media such as the following cannot be used.

  • Media whose end is attached to the paper tube (core)
  • Media that is severely warped or that has a strong tendency to reroll
  • Media that cannot withstand the heat of the media heating system
  • Media whose paper tube (core) is bent or crushed
  • Media that bends under its own weight when loaded
  • Media on a sagging roll
  • Media that is rolled unevenly