Important Notes When Performing Output from General Application

Important Notes When Performing Output from Adobe Illustrator

MEMO

These are cautionary notes on making output from Adobe Illustrator using the BN-20 driver.

These notes do not apply if you are using VersaWorks.

When you want to perform cutting, clear the Print As Bitmap check box in the Print dialog box.
To display the Print dialog box, click File - Print.
Set the document's color mode to RGB.
If you select CMYK mode, the CMYK values will be converted to RGB values when the output is generated, so the color (RGB value) specified as the cutting line may be changed. In this case, it may not be possible to perform cutting because the color specified for the driver as the cutting line and the color output from Illustrator differ.
Do not cancel printing by operating Illustrator.
To cancel printing, hold down the [POWER] key on the BN-20A. When you print from Illustrator, the now printing dialog box is displayed. Even if you click the Cancel button in this dialog box, the printing process will continue running, and you will not be able to operate Illustrator until this process finishes.

Important Note When Performing Output from CorelDRAW

MEMO

This is a cautionary note on making output from CorelDRAW using the BN-20 driver.

This note does not apply if you are using VersaWorks.

Set the document's color mode to RGB.
If you select CMYK mode, the CMYK values will be converted to RGB values when the output is generated, so the color (RGB value) specified as the cutting line may be changed. In this case, it may not be possible to perform cutting because the color specified for the driver as the cutting line and the color output from CorelDRAW differ.