Printer Unit

No.	Name	Function overview
	Front cover	Prevents contact with the print-head carriage and other such fast-moving parts when the machine is operating. To prevent excessive dust from entering inside the machine, keep the front cover closed except when loading objects to be printed on or when performing maintenance.
	Head gap sensor	Detects the height of the object to be printed on. The machine stops when the object to be printed on or other object contacts the head gap sensor.
	Flat table with suction function	This is the flat table on which the object to be printed on is placed. By activating the negative pressure, you can fasten the object in place.
	UV-LED device	Shines the ultraviolet light. Shines the ultraviolet light on the print surface to cure the ink.
	Print-head carriage	Transports the built-in print heads and UV-LED device.
	Drain bottle	Discharged fluid is stored in this bottle.
	Right Cover	Provides access to the interior of the lower-right side of the machine. Open this cover when performing maintenance such as discarding accumulating discharged fluid.
	Wiper	Cleans the print heads. Removes dirt and excess ink that have adhered to these heads.
	Cap Top	Prevents the print heads from drying out. Seals to the print heads to protect the ink emission surface when the print-head carriage is at the right side of the machine, such as when waiting for printing.
	Capping station	The wiper and cap top are installed on this part. Cleaning and capping the print heads are performed by raising and lowering the capping station.

Front cover

Prevents contact with the print-head carriage and other such fast-moving parts when the machine is operating.

To prevent excessive dust from entering inside the machine, keep the front cover closed except when loading objects to be printed on or when performing maintenance.

Head gap sensor

Detects the height of the object to be printed on.

The machine stops when the object to be printed on or other object contacts the head gap sensor.

Flat table with suction function

This is the flat table on which the object to be printed on is placed. By activating the negative pressure, you can fasten the object in place.

UV-LED device

Shines the ultraviolet light.

Shines the ultraviolet light on the print surface to cure the ink.

Print-head carriage

Transports the built-in print heads and UV-LED device.

Drain bottle

Discharged fluid is stored in this bottle.

Right Cover

Provides access to the interior of the lower-right side of the machine.

Open this cover when performing maintenance such as discarding accumulating discharged fluid.

Wiper

Cleans the print heads.

Removes dirt and excess ink that have adhered to these heads.

Cap Top

Prevents the print heads from drying out.

Seals to the print heads to protect the ink emission surface when the print-head carriage is at the right side of the machine, such as when waiting for printing.

Capping station

The wiper and cap top are installed on this part.

Cleaning and capping the print heads are performed by raising and lowering the capping station.

No.	Name	Function overview
	Power switch	Turns the machine power on/off.
	Ethernet cable	Connect the Ethernet cable to the Ethernet cable port. This machine is connected directly to the computer by the Ethernet cable.
	Ink tank cover	Protects the top of the ink tanks from light.
	Power cable	Connect the power cable to the power cable port.
	Ink tanks	These are the ink tanks that are filled with ink. Fill with the ink color specified on the ink color label.

Printer Unit

Front

Rear

Feedback

Feedback