Cleaning the Machine on a Daily Basis

As part of daily cleaning, wipe away any buildup of ink or grime that has adhered to the machine. In particular, the flat table is likely to have a buildup of grime. Clean by wiping with a cloth moistened with neutral detergent diluted with water then wrung dry.
WARNING

Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.

Doing so may cause a fire.

IMPORTANT

  • This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.

  • Never attempt to oil or lubricate the machine.

  • Before performing this operation, remove any objects to be printed on.

IMPORTANT
Open and close the front cover and right cover gently. If you open and close them forcefully or release the cover when it is partly open, not only may it malfunction, but you may also be injured. When opening and closing the front cover, grasp the center of the front cover to open or close it.
CoverCaution
Procedure
  1. Press the [FRONT] button and move the flat table all the way forward.
    MEMO

    The flat table will continue moving if you press and hold the [FRONT] button for three seconds or longer and then release it. To stop the movement, press [FRONT] again or press the [BACK] button.

  2. Open the front cover.
  3. Clean the flat table.
    TableCleaning
  4. Clean the operation panel or the screen display.

    Clean by wiping with a cloth moistened with neutral detergent diluted with water then wrung dry, or a soft, dry cloth, taking care not to scratch the screen.

    PanelCleaning
  5. Press [BACK] to move the flat to the back.
    MEMO

    The flat table will continue moving if you press and hold the [BACK] button for three seconds or longer and then release it. To stop the movement, press [BACK] again or press the [FRONT] button.

  6. Close the front cover.