Ink Renewal

This is used to correct dot drop-out or dot displacement, and to restore ink density that cannot be fixed by any means.
IMPORTANT To replace the ink in the path, a large amount of ink is consumed and then discharged as discharged fluid. Do not do this frequently.
Procedure
  1. Set up the nozzle drop-out test paper.
  2. On the Utility home screen, click BN2_Utility_Icon_MENU.
  3. Click Execute for Ink Renewal under Maintenance.
    Starts the Ink Renewal function.
  4. When ink renewal is finished, click Output under Nozzle Drop-out Test.
  5. When printing is complete, open the front cover.
  6. Check whether there is dot drop-out or dot displacement in the test pattern.
    Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
    BD-8_TestPrint_Normal
    • If no dot drop-out or dot displacement occurs, preparations for output are finished.
    • If there still is dot drop-out or dot displacement, contact your authorized dealer.
  7. Close the front cover.
  8. Click Close to return to the original screen.