Emergency Stop Error

This message appears when the emergency stop button is pressed. The sub power LED is lit in red.

Procedure
  1. Eliminate the cause of the emergency stop button being pressed.
  2. Turn the emergency stop button clockwise until it stops turning, and then release the button.

    If the button is pulled out toward you, it is released.

    BD-8_EmergencySWCancel
  3. Hold down the sub power button for one second or longer to turn off the sub power. Repeat to turn on the sub power.
    The machine recovers from the emergency stop status.
  4. Perform a nozzle drop-out test.
    Perform cleaning as necessary.