Schritt 3: Perform Printing

Anmerkung Depending on the computer display settings, the An Gerät senden or Durck-Parameter window may not fit on the monitor. If this occurs, adjust the magnification and layout in the display settings.
Vorgehensweise
  1. Open the printing data created in FlexiDESIGNER.
    Click Datei - Öffnen to open the saved printing data.
  2. Click BD-8_Flexi-Icon_SendtoDevice.
    The An Gerät senden dialog box opens.
  3. Check the following.
    • Gerät: BD-8
    • Anzahl der Drucke: 1
    • Senden als:Seite
  4. Click Durck-Parameter.
  5. In the Qualität tab, select the following.
    • Medientyp: General or Generic Distance*1
    • Druckqualität:Standard
    • Modus: CMYK (v)
    • Layout: Auf Medium zentrieren
  6. Click OK.
    The Print Parameters window closes.
  7. Click Senden.
    Printing starts.
  8. Once printing is complete, remove the object, and exit out of setup in Utility.