Setting the Temperature during Standby

Set the print heater temperature used when the main power and the sub power are switched on and the loading of the media is not complete. For the dryer, set the temperature used when the loading of the media is complete.
Procedure
  1. Tap AP-640_Panel_Icon_MENU.
  2. Tap Preferences - Standby Heater Temperature.
  3. Tap AP-640_Panel_Icon_MINUS or AP-640_Panel_Icon_PLUS next to Print Heater or Dryer to set the temperature.
    When this is set to VG3_Panel_Icon_Toggle_OFF (off), each setting is switched off during standby.
  4. Tap Save to confirm your entry.
  5. Tap AP-640_Panel_Icon_HOME to go back to the original screen.
    MEMO

    • Default settings

      Print Heater: 25°C (77°F)

      Dryer: 60°C (140°F)