Important Notes on Handling and Use

Printer

  • This machine is a precision device.
    • Never subject the machine to impacts or excessive force.
    • Never needlessly put your hand or fingers inside the cover, the ink slots (the ink-cartridge ports), or other internal areas of the machine.
  • Install the machine in a suitable location.

    • Install the machine in a location having the specified temperature and relative humidity.

    • Install the machine in a quiet, stable location offering good operating conditions.

  • Leave the printer's main power switched on 24 hours a day.
    • Automatic maintenance may be performed even during standby. Never switch off the main power.

  • The print heads are delicate.

    • Do not touch them needlessly. Only touch them to perform the work described in this manual. Furthermore, to prevent media from scraping the print heads due to (for example) media coming loose during transportation, exercise caution when loading media, when setting the print head height, and when performing similar work. Failure to handle with care may cause damage.

    • The print heads may be damaged if allowed to dry out. The machine prevents desiccation automatically, but improper operation may render this feature inoperative. Operate properly, as specified in this manual.

    • Never leave the machine with an ink cartridge removed. Remaining ink in the printer may harden and clog the print heads.

    • Depending on the situation, the print heads require various types of cleaning. Read this manual thoroughly and perform the appropriate maintenance at the appropriate times.

    • The print heads are components that wear out. Periodic replacement is required, with the frequency of replacement depending on use.

  • Keep the operation panel clean.

    • If dirt or ink adheres to the operation panel, immediately wipe it clean with dry, soft fabric.

  • This machine becomes hot.

    • Never cover the ventilation holes with cloth, tape, or anything else.

    • If the machine is used for a long time, the temperature in the room will also become hot. In order to maintain the specified temperature, use ventilation or air conditioning to avoid overheating the room.

Ink Cartridges

WARNING

Never store ink, cleaning liquid, or discharged fluid in any of the following locations.

  • Any location exposed to open flame
  • Any location where high temperature may occur
  • Near bleach or any other such oxidizing agent or explosive material
  • Any location within the reach of children

Fire may be a danger. Accidental ingestion by children may pose a health hazard.

  • The ink pouches inside ink cartridges come in various types.

    • Use a type that is compatible with the printer. Also, be sure to use only genuine items from Roland DG Corporation.

  • Never subject ink cartridges and ink pouches to impacts and never attempt to disassemble ink pouches.

    • Never drop the ink cartridges and ink pouches or shake them forcefully. The impact may rupture the internal pouches and cause the ink to leak.

    • Never attempt to disassemble ink pouches.

    • Never attempt to refill the ink in ink pouches.

    • If ink gets on your hands or clothing, wash it off as soon as possible. Removal may become difficult if you leave such adhered ink untreated.

  • Storage

    • Use up the ink before the expiration date printed on the ink pouch.
    • Store ink pouches in a location that is not subject to direct sunlight or strong illumination.

    • Store ink pouches unopened in a well-ventilated location at a temperature of 5°C to 30°C (41°F to 86°F).