Specifications
| AG-640 | ||
|---|---|---|
| Printing method | Piezo ink-jet method | |
| Media | Width | 355 to 1,625 mm (13.98 to 63.97 in.) |
| Thickness |
Max. 1.0 mm (39.37 mil) with liner, for printing Max. 0.4 mm (15.74 mil) with liner and 0.22 mm (8.66 mil) without liner, for cutting |
|
| Roll outer diameter | Max. 250 mm (9.8 in.) | |
| Roll weight | Max. 45 kg (99.20 lb.) | |
| Core diameter | 76.2 mm (3 in.) or 50.8 mm (2 in.) | |
| Printing/cutting width*1 | Max. 1,600 mm (62.99 in.) | |
| Ink | Type | Resin ink 750 ml pouch |
| Color |
Seven colors (cyan, magenta, yellow, black, white, orange, and red) and optimizer Four colors (cyan, magenta, yellow, and black) and optimizer |
|
| Printing resolution (dots per inch) | Max. 1,200 dpi | |
| Cutting speed | 10 to 300 mm/s (0.39 to 11.8 in./s) | |
| Blade force*2 | 30 to 500 gf | |
| Blade | Type | Roland CAMM-1 series blade |
| Offset | 0.000 to 1.500 mm (0.0 to 59 mil) | |
| Software resolution (when cutting) | 0.025 mm/step (0.98 mil/step) | |
| Ink drying system*3 |
Print heater set temperature: 25 to 45°C (77 to 113°F) Dryer set temperature: 70 to 98°C (158 to 208°F) |
|
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) | |
| Power-saving function | Automatic sleep feature | |
| Rated input |
Printer: 200-240 Va.c. 50/60 Hz 3 A Blower 1: 200-240 Va.c. 50/60 Hz 12 A Blower 2: 200-240 Va.c. 50/60 Hz 10 A Printer (output): 200-240 Va.c. 50/60 Hz 3 A |
|
| Power consumption | During operation | Approx. 4,200 W |
| Sleep mode | Approx. 60 W | |
| Acoustic noise level | During operation | 70 dB (A) or less |
| During standby | 68 dB (A) or less | |
| Dimensions (width × depth × height) | 3,004 mm × 866 mm × 1,412 mm (118.27 in. × 34.09 in. × 55.59 in.) | |
| Weight | 268 kg (590.84 lb.) | |
| Environment*4 | During operation | Temperature: 20 to 30°C (68 to 86°F), humidity: 20 to 80%RH (no condensation) |
| Recommended environment | Temperature: 20 to 25°C (68 to 77°F), humidity: 40 to 60%RH (no condensation) | |
| Not operating | Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation) | |
| Included items | Dedicated stand, power cords, dryers, media take-up unit, media holders, replacement blade for separating knife, cleaning liquid bottle for maintenance, drain bottles, User's Manual, software (VersaWorks, Roland DG Connect Hub), etc. | |
*1 The length of printing or cutting is subject to the limitations of the application software.
*2
- 500 gf is the maximum instantaneous blade force.
- The blade force must be adjusted according to details such as the media thickness.
*3
- Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
- Depending on the ambient temperature and the media width, the set temperature may not be reached.
*4 Use the machine in an operating environment within these ranges. Also, printing in the recommended environmental conditions (A) is recommended to prevent or reduce any possible differences in print quality depending on media.
