Updater [ 2023-08-23, V340 ]

V340 Date: 2023/8/23
[bug fix] (Following problems have been fixed.)
1. When automatic correction is performed, an abnormal value may be set as the correction value.​

 

<Note>
- If you upgrade the firmware, you need to upgrade VPanel for DWX to V3.16.1 or later at the same time.

 

V330 Date: 2022/11/2
[bug fix] (Following problems have been fixed.)

1. Milling may not start when data is ouput from VPanel for DWX.

2. When an error 1020/1021-000*/1022-000* occurs, the contents of the log stored in the local file of the PC are not correct.


NOTE
- If you upgrade the firmware, you need to upgrade VPanel for DWX to v3.16.1 or later at the same time.

 

V320 Date: 2022/5/13
[change in spec.]
1. The stability has been improved.


NOTE
- If you upgrade the firmware, you need to upgrade VPanel for DWX to v3.16.1 or later at the same time.

 

V310 Date: 2021/9/14
[change in spec.]
1. Item for checking amount of coolant flow rate visually has been added in [Maintenance​] > [Collet maintenance]. 

- VPanel V3.13.0 or later is required.


V300 Date: 2021/2/1
[change in spec.]
1. Milling with ZV-42W (multi-pin clamp) has been supported.
- CAM that supports ZV-42W is required.

V200 Date: 2020/5/13
[change in spec.]
1. Titanium abutment can be milled now.
- Optional item (AK-1) and its supported CAM are required.

V140 Date: 2019/10/15
[change in spec.]
1. Stability of spindle control has been improved

V130 Date: 2018/12/5
[change in spec.]
1. If the machine is connected to certain types of the computer via LAN, VPanel may become offline.

V120 Date: 2018/10/5
[change in spec.]
1. The stability has been improved when the machine is connected to a computer via USB.
2. The stability has been improved when the machine is connected to a computer via LAN.
3. The stability of canceling milling operation has been improved.
4. The stability of spindle operation has been improved.
5. The stability of the flow rate sensor has been improved.
[bug fix] (Following problems have been fixed.)
1. Milling is stopped when milling data communication is disconnected due to the problem of computer.