• Basic Handling Methods
    • Basic Information
      • Part Names and Functions
      • Object to Be Printed On
      • Features of Inks
      • Menu List
    • Basic Operations
      • Power Supply Operations
      • Checks before Operations
  • Output Method
    • Printing Operations
      • Printing method
      • Pausing and Canceling Printing
  • Optimizing Quality and Efficiency
    • Optimizing the Setup Method
      • Suction Function Setting
      • Adjusting the Height
      • Print Area Settings
    • Optimizing the Printing Quality
      • Using the Correction Functions
      • Preventing Ink Discharge Defects
      • Improving Ink Adhesion
    • Optimizing Work Efficiency
      • Using the Preset Function
      • Reducing Print Time
      • Reducing Paper Used during Printing Tests
      • Optimizing Head Refreshing Work When Using Jigs
    • Optimizing Operation Management
      • Managing the Operations Appropriately and Efficiently
      • Managing the Basic Settings of the Printer
  • Maintenance
    • Introduction
      • Important Notes on Handling and Use
      • Basic Maintenance Knowledge
    • Regular Maintenance
      • Cleaning the Machine
      • Replacing Ink Cartridges
      • Disposing of Discharged Fluid
      • Maintenance That Must Be Performed Daily
      • When Normal Cleaning Is Not Effective
      • Manual Cleaning
      • Cleaning That Must Be Performed Once a Month or More
    • Advanced Maintenance
      • Restoring the White Ink Concentration
      • Handling Severe Dot Drop-out
    • Replacing Consumable Parts and Products
      • How to Replace Consumable Parts
      • Inquiries for Consumable Parts and Products
  • Troubleshooting Methods
    • Print Quality Problems
      • Printed Results Are Coarse or Contain Horizontal Stripes
      • The Object to be Printed on Becomes Soiled When Printed
      • Colors Are Unstable or Uneven
    • Machine Problems
      • The Print Heads Do Not Move
      • The Printer Unit Does Not Run
      • The Flat Table Does Not Move
      • The Head Gap Sensor Does Not Detect the Object to Be Printed on
      • It Is Not Possible to Check the Amount of Discharged Fluid in the Drain Bottle
    • Messages on the Operation Panel
      • Messages
      • Error Messages
  • Appendix
    • How to Connect External Devices
      • Connecting and Removing External Devices
    • Operations When Moving the Unit
      • Moving the Unit
    • Main Specifications
      • Dimensional Drawings
      • Locations of the Power Rating and Serial Number Label
      • Specifications and Diagrams for the External Expansion Terminal
    • MEMO
Index
  1. Home
  2. Maintenance
  3. Replacing Consumable Parts and Products
  4. Inquiries for Consumable Parts and Products
  5. Items That You Can Purchase and Replace by Yourself

Items That You Can Purchase and Replace by Yourself

To purchase the following consumable parts or products, contact your authorized Roland DG Corporation dealer or visit our website (http://www.rolanddg.com/).

Item Related page
Wipers Replacing the Wipers and Wiper Cleaner
Wiper cleaner
Filter Replacing the Filter
Cleaning sticks Manual Cleaning
Cleaning liquid
Head cleaning sheet Head Refreshing Method
Cleaning liquid for head refreshing
  • Maintenance
    • Introduction
    • Regular Maintenance
    • Advanced Maintenance
    • Replacing Consumable Parts and Products
      • How to Replace Consumable Parts
      • Inquiries for Consumable Parts and Products
        • Items That You Can Purchase and Replace by Yourself
        • Items That Require Inquiries before Replacement
FA01581/R1-190830
Copyright 2019 © Roland DG Corporation  https://www.rolanddg.com/