Load a Preset and Print

This loads a saved preset from among the 40 types of presets. If you load a preset while SETUP is lit, SETUP flashes. After that, when the setup operation is complete, SETUP returns to being lit.
  1. Press MENU.
  2. Press ▶, then ▼▶ to display the screen shown below.


  3. Select the preset that you want to load.
    Select one of the 40 types of presets (when no names have been assigned, select from NAME1 to NAME40) or DEFAULT (DEFAULT is the factory defaults for each setting).
    1. Press ▲ or ▼ to select the name of the preset you want to load.
    2. Press ENTER to confirm your entry.


      Setup is canceled and [SETUP] turns off. The selected preset name is displayed on the lower right side of the screen.
  4. Attach the object to be printed on.
  5. Press SETUP.
    The loaded preset setting is displayed.


  6. Press ENTER.
    The screen shown below appears.


  7. Perform printing.