Cleaning is important in order to ensure clean cutting. Clean the machine periodically.
CAUTION
Be sure to perform operations as specified by the instructions, and never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury or burns.
CAUTION
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause fire.
Cleaning the Machine
Items Required
Cloth soaked in water and thoroughly wrung out
Switch off the power before cleaning the machine.
1: Grit rollers
Periodically wipe away any grime.
2: Display:
Wipe the display clean with a dry cloth.
3: Pinch rollers
Remove any buildup of media and other material using a brush. Never use a metal brush.
Cleaning the Blade Holder Cap
If there is a buildup of pieces of material or dust inside the cap, loosen the cap, remove it, and then remove any foreign matter. If pieces of material or dust build up inside the blade holder cap, the blade will stop turning smoothly and will no longer cut cleanly.
 |
1: Cap 2: Loosen |