CAUTION

Never touch the cutting carriage while output is in progress.
The cutting carriage moves at high speed. Coming into contact with the moving carriage may cause injury.

Clear all data remaining in the machine's memory, and then send new data so that only the required data is stored in the machine's memory.

Procedure

Make sure the material is loaded in the machine.
  1. Press [MENU] several times to display the screen shown in the figure.

     

  2. Press [Up] several times to display the screen shown in the figure.

    If [NO DATA] is displayed, proceed to step 6.

     

  3. Press [Right].

     

  4. Use [Up ] and [Down] to select [CLEAR].

     

  5. Press [ENTER].

    The data is cleared.

     

  6. Send data from the computer.