Using Thinner or Harder Material than Normal

You can use the fan to hold down the material and prevent misalignment.
Change these settings to match the thickness and hardness of the material used.

Procedure

Make sure the material is loaded in the machine.

1. Press [MENU] several times to display the screen shown in the figure.

   

    

2. Press [] several times to display the screen shown in the figure.

   

    

3. Press [].

4. Press [] several times to display the screen shown in the figure.

   

5. Press [].

    

6. Use [] and [] to select the air volume.

   1: Weak ... 5: Strong, AUTO:      Automatic

   Use a weaker air volume when using thin material.

   

7. Press [ENTER].

   Press [MENU] to return to the top screen.